Fix Soundbar No Sound Over HDMI ARC

Silence is a setting

A silent soundbar is almost always a settings problem. The TV keeps using its own speakers until you tell it otherwise.

Find the ARC port

Look for the HDMI input labeled ARC or eARC on your TV. A bar plugged into a plain HDMI input stays quiet on many sets.

Connect the cable

Use a high-speed HDMI cable between the labeled ARC ports on the TV and the soundbar's HDMI output, with both devices off.

Turn on HDMI-CEC

CEC lets the TV remote control soundbar volume and power. Samsung calls it Anynet+, and Sony calls it BRAVIA Sync.

Switch the TV output

Change sound output from TV speakers to the soundbar. Samsung lists it as Receiver (HDMI); Sony calls the option Audio System.

Check the basics

Confirm the bar's input matches the source, the cable sits in the ARC port, then toggle CEC and power-cycle both devices.

Try another cable

Reseat both ends or swap in a different high-speed HDMI cable. Also check the TV for pending software updates.

Fall back to optical

If sound arrives over optical, the soundbar is fine and the fault sits in the HDMI port, cable or CEC settings.

Read more

Every step in the full guide Photos: Pixabay

Arrow