How to Enter Safe Mode Windows 10 – Safe mode begins Windows in a minimal form, with only a few files and drivers installed. If a problem does not occur in safe mode, it is unlikely that the issue is caused by default settings or basic device drivers. Observing Windows in safe mode allows you to pinpoint the cause of a problem and aids in the troubleshooting of computer issues.

Safe Mode and Safe Mode with Networking are the two variations of safe mode. Safe Mode with Networking includes network drivers and services that allow you to connect to the internet and other computers on your network.

Choose one of the sections below to learn how to start your computer in safe mode from Settings, the sign-in page, or a black or blank screen.

How to enter safe mode windows 10

Starting with the settings

To launch Settings, use the Windows logo key + I on your keyboard. If it doesn’t work, press and hold the Start button while selecting Settings.

1. Select System > Recovery from the drop-down menu.
2. Open the Recovery Options menu.
3. Select Restart immediately from the Recovery options menu, next to Advanced startup.
4. Select Troubleshoot > Advanced options > Startup Settings > Restart after your PC restarts to the Choose an option screen. It’s possible that you’ll be prompted to enter your BitLocker recovery key.
5. You’ll see a selection of alternatives after your computer restarts. To start your computer in Safe Mode, select 4 or press F4. Select 5 or press F5 for Safe Mode with Networking if you’ll need to utilise the internet.

Using the sign-in screen as a starting point

1. If you can’t get into safe mode because you can’t open Settings, restart your device from the Windows sign-in screen.
2. Press and hold the Shift key while selecting Power > Restart on the Windows sign-in screen.
3. Select Troubleshoot > Advanced options > Startup Settings > Restart after your PC restarts to the Choose an option screen. It’s possible that you’ll be prompted to enter your BitLocker recovery key.
4. You’ll see a selection of alternatives after your computer restarts. To start your computer in safe mode, press 4 or F4. Select 5 or F5 for Safe Mode with Networking if you’ll need to utilise the internet.

Using a black or blank screen as a starting point

To start in safe mode, you’ll need your BitLocker key if your device is encrypted.

You must first access the Windows Recovery Environment before entering safe mode (winRE). You’ll achieve this by continually turning your device off and on:

To switch off your device, press and hold the power button for 10 seconds.

To turn on your device, press the power button once more.

Hold down the power button for 10 seconds when Windows starts (for example, some devices show the manufacturer’s logo while restarting) to switch off your device.

• To turn on your device, press the power button once more.
• Hold down the power button for 10 seconds after Windows restarts to turn off your device.
• To turn on your device, press the power button once more.
• Allow your device to reboot into Automatic Repair mode, then choose Advanced options to enter winRE.
• Now that you’re in winRE, you’ll need to complete the following steps to get to safe mode:
• Select Troubleshoot > Advanced options > Startup Settings > Restart from the Choose an option screen.
• You’ll get a selection of alternatives after your device restarts. For Safe Mode with Networking, select option 5 from the list or press F5.
• See Troubleshoot black or blank screen errors for additional information on black or blank screen errors.
• Notes: Simply restarting your device should bring you out of Safe Mode and back into normal mode. However, if your computer continues to boot into Safe Mode after restarting, try the following:
• Raise your hand and press the Windows logo key.
• In the Open box, type msconfig and then click OK.
• The Boot tab should be selected.
• Clear the Safe boot checkbox in the Boot settings section.

Windows 10 is the latest version of Microsoft’s operating

Starting with the settings

To launch Settings, use the Windows logo key + I on your keyboard. If it doesn’t work, press and hold the Start button while selecting Settings.

Select Update & Security > Recovery from the drop-down menu.

Open the Recovery Options menu.

Select Restart now from the Advanced starting menu.

Select Troubleshoot > Advanced options > Startup Settings > Restart after your PC restarts to the Choose an option screen. It’s possible that you’ll be prompted to enter your BitLocker recovery key.

You’ll see a selection of alternatives after your computer restarts. To start your computer in Safe Mode, select 4 or press F4. Select 5 or press F5 for Safe Mode with Networking if you’ll need to utilise the internet.

Using the sign-in screen as a starting point

If you can’t get into safe mode because you can’t open Settings, restart your device from the Windows sign-in screen.

Press and hold the Shift key while selecting Power > Restart on the Windows sign-in screen.

Select Troubleshoot > Advanced options > Startup Settings > Restart after your PC restarts to the Choose an option screen. It’s possible that you’ll be prompted to enter your BitLocker recovery key.

You’ll see a selection of alternatives after your computer restarts. To start your computer in safe mode, press 4 or F4. Select 5 or F5 for Safe Mode with Networking if you’ll need to utilise the internet.

Also Read: 

Change Keyboard Language in Android, iPhone, iPad

How to Make Form in Google Forms: How to Use: Customize

On Mobile Android, iPhone How to Change Instagram Password

Exclusive and Quick Steps to Remove a Page in Word

Using a black or blank screen as a starting point

To start in safe mode, you’ll need your BitLocker key if your device is encrypted.

You must first access the Windows Recovery Environment before entering safe mode (winRE). You’ll achieve this by continually turning your device off and on:

To switch off your device, press and hold the power button for 10 seconds.

To turn on your device, press the power button once more.

Hold down the power button for 10 seconds when Windows starts (for example, some devices show the manufacturer’s logo while restarting) to switch off your device.

To turn on your device, press the power button once more.

Hold down the power button for 10 seconds after Windows restarts to turn off your device.

To turn on your device, press the power button once more.

Allow your device to restart completely. You are going to enter winRE.

Now that you’re in winRE, you’ll need to complete the following steps to get to safe mode:

Select Troubleshoot > Advanced options > Startup Settings > Restart from the Choose an option screen.

You’ll get a selection of alternatives after your device restarts. For Safe Mode with Networking, select option 5 from the list or press F5.

See Troubleshoot black or blank screen errors for additional information on black or blank screen errors.

Notes: 

Simply restarting your device should bring you out of Safe Mode and back into normal mode. However, if your computer continues to boot into Safe Mode after restarting, try the following:

Raise your hand and press the Windows logo key.

In the Open box, type msconfig and then click OK.

The Boot tab should be selected.

Clear the Safe boot checkbox in the Boot settings section.

The article has provided a detailed study about how to enter safe mode windows 10 in detail. I hope, the article finds helpful for you. 

• Bio

Jennie Marquez

Jennie B. Marquez is a TV presenter, writer, and video producer. Also, Khaleesi, despite the fact that she does not legally control any land, army, or dragons. Yet.