How to Fix HP Stuck in Boot Loop?


When your HP computer gets stuck in a boot loop, it can be a pain. You can’t get to the operating system on your computer if it keeps restarting itself during the boot process. This is known as a boot loop. Several things could be causing this issue, including hardware issues, broken system files, or issues with Windows patches. It’s good that there are several things you can do to fix this. There are some quick and easy ways to fix an HP computer that is stuck in a boot loop in this guide.

What is the Boot Loop Problem?

Being in a boot loop can show up in several different ways. Your HP computer might get stuck on the HP logo screen, restart itself over and over without getting to the desktop, or show you an error message before restarting. These are the main things that can cause a boot loop:

  • Broken System Files: Important system files that are needed to start up may be missing or broken.
  • Boot loops can be caused by Windows fixes that are missing or broken. Note that Windows Update Failed this time.
  • Hardware Problems: Hard drive, RAM, or motherboard problems can lead to boot loops.
  • Driver Conflicts: It can be hard to start up if your drivers are out of date or don’t work with each other.
  • There is a chance that malicious software could damage the boot area, which would cause the computer to restart itself over and over again.

Quick Methods to Fix HP Stuck in Boot Loop

Method 1: Perform a Hard Reset

The boot loop might be fixed by a hard reset, which gets rid of temporary files and brings back the normal setup settings.

  • Hold down the power button until the computer turns off.
  • Take out any printers, USB drives, or other devices that are plugged into your computer. And disconnect all of them.
  • Take out the battery if you can. If you can get the battery out of your laptop, do so.
  • Hold Down the Power Button: To get rid of any extra electricity, press and hold the power button for about 15 seconds.
  • Plug the power cord and battery back in. If you need to, put the battery back in and plug in the power cord again.
  • Start up the computer: Press the power button to start up the machine. After that, check to see if the boot loop issue is fixed.

Method 2: Boot into Safe Mode

It starts up with only the most basic tools and services when you put it in Safe Mode. This can help you fix the boot loop and figure out what’s wrong.

  • Hold down the power button for a few seconds to turn off your computer.
  • Start the Computer: Press the power button to start the computer.
    Hold down the power button during the start process until the HP logo appears. This is what will shut down the machine. Do this over and over. It should work the third time around and get to the Windows Recovery Environment (WinRE).
  • For the Advanced Options, go to the WinRE screen and click “Startup Settings,” then “Troubleshoot,” and finally “Advanced options.”
  • To start Safe Mode, click “Restart” on the Startup Settings screen and then press F4.
  • In Safe Mode, you can try to restore the system, get rid of apps you just loaded, or get the drivers up to date.

How to Fix HP Stuck in Boot Loop? Quick Methods

Method 3: Run Automatic Repair

Automatic Repair is a tool that comes with Windows that can fix everyday boot issues.

  • It shows the Windows Recovery Environment (WinRE) which: Follows the steps in Method 2 to get to the WinRE screen.
  • Click on Fix the Problem: Click on “Troubleshoot” and then “Advanced options.”
  • Pick the OS you want to use and go to “Startup Repair” to fix the restart. Right away, Windows will try to figure out what’s wrong and fix it.

Method 4: Restore the System to a Previous Point

If you just updated or downloaded software and then the boot loop started, you can reset your system to a time when everything was fine.

  • Type in WinRE: Follow the steps in Method 2 to get to the Windows Recovery Environment.
  • If you click on System Restore: Open “Advanced options,” click “Troubleshoot,” and then click “System Restore.”
  • Pick out a time to heal: Just follow the steps on the screen to pick a restore point and get your system back up and running.

Method 5: Check and Repair Corrupted System Files

You can use the Command Prompt in WinRE to look for broken system files and fix them.

  • Type in WinRE: Follow the steps in Method 2 to get to the Windows Recovery Environment.
  • Log in to the command prompt: Select “Advanced options,” then “Troubleshoot,” and finally “Command Prompt.”
  • With SFC and DISM, do the following: Type sfc /scannow and then press Enter. This tool will look for and fix any broken system files it finds. When the SFC scan is done, type dism /online /cleanup-image /restorehealth and press Enter. In this case, the Windows screen will be fixed.

How to Fix HP Stuck in Boot Loop? Quick Methods

Method 6: Update BIOS/UEFI

BIOS/UEFI software that is out of date or broken can make it hard to boot. One way to fix the issue is to update the BIOS or UEFI.

  • HP can help you: The HP support page has the most current BIOS/UEFI update. Do not forget to type in the model number of your machine.
  • Get it and put it in: Follow the steps on the page to get the update and set it up.

Method 7: Reinstall Windows

You might need to restart Windows if none of those work. You shouldn’t do this last thing because it will delete everything on your system drive.

  • For this step, you will need to use a different computer and put the Windows software files on a USB drive that can be used.
  • To start up from the USB drive, plug the drive into your HP computer and turn it back on. Press the right key to get to the start screen, then pick the USB drive.
  • Put Windows back on: Just follow the steps on the screen to get Windows back.


Although it can be hard to fix an HP computer stuck in a boot loop, you can figure out what’s wrong and fix it. By following these steps, you can get to the bottom of the boot loop and fix it, whether it’s caused by broken system files, hardware issues, or a clash between programs.

You shouldn’t lose your important data if something goes wrong in the future. You should always back it up regularly. The next step might be to talk to a skilled tech or call HP support for more help if none of these work.

For more updates, please bookmark our channel. You can also share it with your friends family or groups. If you have any queries, suggestions, or comments about our content or channel, please comment in the comment box below.

Moreover, you can also check out our detailed guide on How to Stop Cyberattacks and Private information Leak with iTop VPN? or Protect Your Information: Tips for Fixing Edge’s ‘Not Secure’ Error! or More Information about How to Download Garena Free Fire for min size.

Leave A Reply

Your email address will not be published.