When your Lenovo laptop gets stuck on the Lenovo screen, it can be annoying and even scary. Most of the time, this issue means there is a problem with the boot process. Some of the things that could cause this are broken hardware, bugs in the software, or damaged system files. You can fix this problem and get your laptop back up and running by following a few simple steps. This guide will show you how to fix a Lenovo laptop that’s stuck on the Lenovo screen.
Table of Contents
Lenovo Laptop Stuck on Lenovo Screen
Most likely, your Lenovo laptop is stuck on the Lenovo screen because it can’t finish the boot process. Several things could go wrong, including issues with the BIOS settings, the hard drive or SSD, system files that are broken, or external devices that don’t work right. The right fix needs to be used after the root cause has been found.
Initial Troubleshooting Steps
1. Start Over With a Hard Reset
Most of the time, a hard reset can fix small software bugs that make the laptop not start up right. To do a hard restart, you need to:
- Close the PC all the way.
- Take out any plugged-in computers, USB drives, or other drives.
- Take out the battery if you can.
- For 15 to 20 seconds, hold down the power button.
- Once more, connect the battery and charger.
- When you turn on the laptop, see if it gets past the Lenovo screen.
2. Boot into Safe Mode
You can tell if the problem is with a driver or a piece of software by starting up the computer in “Safe Mode.” Do these things to get into Safe Mode:
- Don’t use the computer.
- Press the F8 key over and over until the Advanced Boot Options screen comes up after you turn it on.
- Pick “Safe Mode” from the list and press “Enter.”
- You can fix software problems and figure out what’s wrong with the laptop if it starts up in Safe Mode.
3. Check for External Device Conflicts
Adding extra devices can sometimes mess up the boot process. Take out all of the extras, like printers, USB drives, and hard drives, and try to turn the laptop back on. To find the broken gadget, reconnect each one one at a time until it turns back on.
4. Access the BIOS
If you mess up the BIOS settings, the laptop might not be able to start up right. The problem might be fixed by going into the BIOS and setting it back to the way it was originally. Follow these steps to get to the BIOS:
- Don’t use the computer.
- Press the F2 key (or the key your laptop’s manual says you need to get to the BIOS) as soon as you turn it on.
- Find a way to go back to the original settings once you’re in the BIOS. This is often next to the “Exit” or “Advanced” tab.
- Leave the BIOS and save the changes.
- See if the laptop can get past the Lenovo screen after you turn it back on.
5. Run a Hard Drive Diagnostic
If your hard drive or SSD is broken, it might be hard to start up. A test for diagnostics can help you figure out what’s wrong with the drive. Do these things to test a hard drive:
- Don’t use the computer.
- Do what the manual for your laptop says to do to start: press the F10 key as soon as you turn it on.
- Pick a test to see what’s wrong with the hard drive.
- If changes are found, you may need to get a new hard drive or SSD.
6. Use Windows Recovery Options
If you still have a laptop that shows the Lenovo screen, Windows restore tools can help fix any broken system files. To get to Windows’ repair options, do the following:
- Don’t use the computer.
- As soon as you turn it on, press the F11 key (or the key that the manual for your laptop says to use for recovery).
- Find “Troubleshoot” on the list of options.
- Select “Startup Repair” from the list of “Advanced options.”
- Follow the steps on the screen to fix the system.
Reinstalling Windows
You might need to restart Windows if the above issues don’t get fixed. You should make a copy of everything on the laptop before you start this process. To put Windows on again:
- If you want to make a Windows installation USB drive, use a different machine.
- Your Lenovo laptop should now have the USB drive in it.
- Press the F12 key as soon as the laptop turns on to get to the boot screen.
- Pick out the USB drive on the start screen and press Enter.
- Just follow the steps on the screen to get Windows back.
Conclusion
If your Lenovo laptop gets stuck on the Lenovo screen, it can be scary. But if you follow the right steps, you can usually fix the problem yourself after that. Do easy things like a hard restart and check to see if any other devices are interfering with the problem.
Getting into the BIOS, running hard drive tests, and using Windows recovery tools are some more advanced steps you can try if those don’t work. If nothing else works, you could try loading Windows again to get your computer back to normal. You can fix your Lenovo laptop if you follow these steps.
For more updates, please bookmark our channel. You can also share it with your friends family or groups. If you have any queries, suggestions, or comments about our content or channel, please comment in the comment box below.
Moreover, you can also check out our detailed guide on How to Stop Cyberattacks and Private information Leak with iTop VPN? or Protect Your Information: Tips for Fixing Edge’s ‘Not Secure’ Error! or More Information about How to Download Garena Free Fire for min size.
Frequently Asked Questions (FAQs)
It will not move off the Lenovo screen. Why does that happen?
A Lenovo laptop can get stuck on the Lenovo screen for several reasons. There could be issues with the BIOS, the hard drive or SSD, the system files, or other devices. The right fix needs to be used after the root cause has been found.
I want to restart my Lenovo laptop. So how do I do that?
Turn off the laptop and unplug all of its extra parts. If the battery can be taken out, press and hold the power button for 15 to 20 seconds. Then, put the battery and charger back in and turn the laptop back on.
How do I get into the BIOS of my Lenovo machine?
First, turn off and then on the laptop. Then, press the F2 key (or the key that your laptop’s manual says to press to get into the BIOS) right away. You can save the changes you made in the BIOS and then return it to the way it was.
The hard drive in my Lenovo laptop is giving me trouble. What should I do?
If the hard drive diagnostic test finds issues, the hard drive or SSD is broken. This could mean you need a new hard drive or SSD to fix the boot problem.
Which way do I go to get Windows back on my Lenovo laptop?
Use a different computer to make a Windows installation USB drive. This will help you restart Windows. Then, connect the USB drive to the Lenovo laptop, turn it on, and press the F12 key right away to see the start screen. From the boot window, choose the USB drive. Then, to install Windows again, follow the on-screen instructions.
