How to Fix Acer Loading Screen Stuck?

By Piyusha On Jun 21, 2024

The starting screen on your Acer laptop can get stuck sometimes, which is a pain. It might be hard to do normal things because of this problem. You might not be able to get to important files. Happily, there are a few things you can try to fix this and get your laptop back up and running. There are a lot of steps in this guide that will help you fix your Acer laptop if it gets stuck on the opening screen.

It can be very bad if your Acer laptop gets stuck on the home screen. There are a few things that could cause this problem, such as bugs in the software, broken hardware, or corrupted system files. You can figure out the best way to fix the problem by getting to the bottom of it. This post will show you several ways to fix your Acer laptop and figure out what’s wrong.

Table of Contents

Initial Troubleshooting Steps

If you want to fix something, you should start with some easy steps and work your way up to more complicated solutions. Most of the time, these first steps are enough to fix the issue without having to go through more tough ones.

Getting your Acer laptop to start again: Sometimes all you need to do is get it to work again. Hold down the power button for about 10 seconds to turn off your laptop for good. Press the power button again after a short time to turn it back on. If the starting screen problem is caused by a short-term problem, this process can fix it.
Turning Off External Devices: Other tools, USB drives, or external hard drives can get in the way of the start process. Take all of your other devices off of your laptop and try to turn it back on. Connect each device one at a time until you find the one that isn’t working right if your laptop starts up often.
Getting into Safe Mode: When you start up your computer in Safe Mode, it has fewer drivers and services running. This can help you figure out what’s wrong and fix it.

Hold down the power button on your laptop until it turns off.
Press the power button to turn your machine back on.
Pause the boot process. To turn off the computer, press and hold the power button as soon as you see the Acer sign. Do this over and over.
Get to the more advanced startup choices: It should get to the Windows Recovery Environment on the third try to start up. You can find it by going to Troubleshoot > Advanced Options > Startup Settings and clicking on it.
Start up Safe Mode: Pick the option to put your laptop into Safe Mode, and then restart it.

Troubleshooting Within Safe Mode

There are a few things you can fix in Safe Mode:

This could be the cause of the problem. Run an antivirus tool to check your computer for malware or bugs.
Not install New information: If the problem started after a recent update, delete the update from Settings > Update & Security > View Update History.
Stop programs from starting up: Do not need any of the apps that start up when you open Task Manager.

Running Startup Repair

This is a tool that comes with Windows 10 called Automatic Repair. It can fix several problems with starting up.

Do the same things to get to the Windows Recovery Environment as you did to get to the Advanced Startup Options.
Pick Fix It Yourself: First, click on Troubleshoot, then on Advanced Options, and finally on Startup Repair.
Start the Fix Tool: Just follow the steps on the screen to run the Startup Repair tool. It will scan your system for issues and attempt to fix them on its own.

Performing a System Restore

If the problem keeps happening, you can use System Restore to go back to a time when everything worked fine.

Troubleshoot > Advanced Options > System Restore to get to it. Inside the Windows Recovery Environment is where you can find System Restore.
Pick out a time to heal: Follow the steps on the screen to choose a reset point from before the trouble started.
Put your machine back together: Check your reset point, then sit back and wait for the process to finish. Your computer will turn back on after the repair is done.

Checking for Hardware Issues

This can also happen if your computer’s hardware is broken. This can be found by running tests on the hardware.

See What’s Built-In: A lot of Acer computers come with tools that let you check out what’s wrong with them.
Start up your laptop again and press F2 or Esc to get into the BIOS/UEFI. Click on “diagnostics” to start the tests.
Check for Loose links: If you don’t mind opening your laptop, look for RAM and hard drive links that aren’t tight.
Look at the hard drive: If the hard drive fails, the computer might not be able to start up. Tools like CHKDSK can find and fix problems on a disk.

Resetting the BIOS to Default Settings

If you set up your BIOS incorrectly, your laptop might not start up properly. It could be helpful to return the BIOS to its previous settings.

Type UEFI or BIOS: Restart your computer and press F2, F10, or Delete to get to the BIOS/UEFI options.
Set things to their defaults: There is a way to load the settings back to the way they were on the Exit tab.
Leave and Save: Save the changes and turn off the BIOS or UEFI. It will go back to the way it was when you turn it on again.

Reinstalling Windows

Reinstalling Windows can fix software problems that have been going on for a long time and haven’t been fixed by other steps if nothing else works.

Get the Windows Media Creation Tool from the Microsoft website and use a different computer to make a working USB drive. This will show you how to install Windows.
Start up from the USB drive: Place the USB drive in your laptop, turn it back on, and press the key that looks like F12. This will take you to the start screen. Pick the USB drive to start up.
Get Windows set up: Just follow the steps on the screen to get Windows back. Before you do this, make sure you have a copy of your important files on another thing.

Advanced Troubleshooting

If the issue keeps happening, try these more difficult steps to fix it. Looking for problems with the drivers. An out-of-date or broken driver can make it hard to boot. Open Device Manager in Safe Mode and look for things that have yellow exclamation points on them.

It’s recommended that the drivers for these devices be either updated or put in again. Given a test to see how well I remember things. It can also be hard to boot if the RAM is bad. You can use Memory Diagnostic, which is part of Windows, to check for damage to your memory. Turn the machine back on and let the tool do its job. You might need to get new RAM if it finds issues.

Conclusion

It takes a step-by-step process to fix an Acer laptop that gets stuck on the loading screen. The process starts with easy fixes and goes on to more difficult ones. You can find and fix the problems that are stopping your laptop from starting up right by following this guide. Remember to back up your information often and keep your system up to date to avoid these kinds of issues.

For more updates, please bookmark our channel. You can also share it with your friends family or groups. If you have any queries, suggestions, or comments about our content or channel, please comment in the comment box below.

Moreover, you can also check out our detailed guide on Nickelodeon Kart Racers 3: Slime Speedway drifts to consoles and PC or Acer Predator Helios 300 3D: Check out specifications, price or Quick Troubleshooting Steps For Media Streaming Error Detected in Fortnite!