Sometimes getting error number 0x8024402c is a pain, especially if it stops you from installing important Windows updates. A lot of the time, this mistake means that there is something wrong with your network that is stopping your computer from connecting to the Windows Update servers. You can fix this problem and get your system back on track, though. You should be able to fix error code 0x8024402c if you do this.
A lot of the time, Windows users get the error number 0x8024402c when they try to add updates. If you see this error, your network is likely set up incorrectly, which is stopping your computer from talking to the Windows Update servers. You can fix this mistake if you know what makes it happen most of the time. Most of the time, it’s because the proxy settings are wrong, the network isn’t set up right, or system files are broken.
Table of Contents
Initial Checks
Before you try to solve a more difficult problem, you should first do some simple checks to make sure it’s not an easy one.
What You Should Do First: Check Your Internet Link: First, make sure your internet link is secure. By going to a few different sites in a computer browser, you can be sure that your link works. Before you try to connect to the internet again, make sure these things are right.
Restarting Your Computer: If you get the 0x8024402c error number, restarting your computer can fix a lot of issues. Restart your computer and run Windows Update again if the problem still shows up.
Configuring Proxy Settings
If you set up a proxy, it might be hard for your computer to connect to Windows Update. It might help to make sure these settings are correct.
Disabling Proxy Settings
- Press Windows + R to bring up the Run box.
Type inetcpl.cpl and press Enter to go to Internet Properties.
Click on LAN settings in the Settings menu.
Uncheck the box that says Use a proxy service for your LAN.
Click OK to save the changes.
Resetting Internet Explorer Settings
- Start up the web browser.
Press the gear icon, and then click on Internet settings.
Tap the “Advanced” tab and click on “Reset.”
Choose something and then check the box next to it. Then click “Reset.”
Adjusting Network Settings. Setting up the network wrong can also lead to error code 0x8024402c. If you change the settings for your network, these problems might go away.
Flushing DNS Cache
- Go to the Command Prompt as an administrator and log in.
In the address bar, type /flushdns and press Enter.
You should see a message that says the DNS cache is empty.
Renewing IP Address
- You need to open the Command Prompt and type ipconfig /release. Now press Enter.
Type ipconfig /renew and press Enter.
Your IP address will be changed, which could fix any connection issues.
Modifying Windows Update Settings
You can also fix error number 0x8024402c by setting up Windows Update correctly.
Checking Windows Update Settings
- Going to Settings and then Update & Security will help you do that.
Click on Advanced after going to Windows Update.
Check that the box that says “Get updates for other Microsoft programs” is checked and marked.
Running Windows Update Troubleshooter
- Check for updates and then click on Troubleshoot.
Then click on More ways to fix it.
Windows Update is where you can find the troubleshooter.
Editing the Host File
The host file on your machine might not work right if there are any bad lines in it. The host file is made up of plain text and is used by the operating system to link hostnames to IP addresses. If you mess up this file, it could stop your network links.
- Use the master account to get into Notepad.
Find the host file in C:\Windows\System32\drivers\etc and open it.
Get rid of anything that doesn’t make sense. Save the file and close Notepad.
Disabling IPv6
Error code 0x8024402c can happen when IPv6 makes it hard to connect. If most of your network uses IPv4, turning off IPv6 can help your connections sometimes.
- You need to open the Control Panel to get to the Network and Sharing Center.
Click on Change adapter settings.
Click “Properties” from the menu that comes up when you right-click on your network link.
If you want to remove the check mark from the box next to TCP/IPv6, do so.
Click OK to save the changes.
Using Command Prompt for Advanced Troubleshooting
To get a better idea of what’s wrong, you can use the Command Prompt to check the system.
Running SFC and DISM Scans
- Go to the Command Prompt as an administrator and log in.
Type sfc /scannow and then press Enter. This will fix any system files that are broken.
When the SFC scan is done, type DISM /Online /Cleanup-Image /RestoreHealth and press Enter. The picture of Windows will look better after this.
Additional Command Line Tools
- It is possible to clear the Windows network stack with the netsh winsock reset command.
- With netsh int ip reset, you can start the IP stack over.
Conclusion
When you get rid of error code 0x8024402c, it can be hard to keep Windows up to date. But if you follow the steps in this guide, it will be easy to figure out what’s wrong and fix it. You can connect to Windows Update services again by following these steps. A few of them are checking your internet connection, changing your proxy settings, and doing full system checks. If you do regular upkeep and make sure your network settings are always at their best, you can avoid these kinds of problems in the future.
For more updates, please bookmark our channel. You can also share it with your friends family or groups. If you have any queries, suggestions, or comments about our content or channel, please comment in the comment box below.
Moreover, you can also check out our detailed guide on Some Common Doordash Login Errors and Methods to Fix Them! or Step-by-Step Guide to Check Quota on YouTube! or How Can You Check Data on Devices Connected Through an IoT Network?
Frequently Asked Questions (FAQs)
What is the reason for error code 0x8024402c?
Getting the error code 0x8024402c normally means that the network wasn’t set up right, the proxy settings were set wrong, or the system files were damaged. It’s giving you this problem because your computer can’t connect to the Windows Update services.
Can I fix the error code 0x8024402c myself?
If you follow the steps in this guide, you can fix error code 0x8024402c without having to hire a pro. In these steps, you may need to check your internet connection, change your network settings, or use command line tools to fix system files.
Is it safe for my computer to turn off IPv6?
It might not be a bad idea to turn off IPv6 if your network mostly uses IPv4. But some networks and apps today need IPv6, so it’s important to check that turning it off won’t mess up other connections. If you’re not sure, ask your ISP or network manager.
How can I tell if the mistake is my server settings?
Your proxy settings may be to blame for the error number 0x8024402c. If this is the case, you may also have trouble connecting to the internet or going to some websites. You can find out if the proxy settings are the problem by turning them off for a while.
What should I do if none of the steps work to fix the mistake?
If none of the steps for fixing work, you may need to get help from a professional or call Microsoft support. There could be issues with your hardware or operating system that a pro needs to find and fix.
