Back To Top

 How to Hard Reset Xbox Series X Console

How to Hard Reset Xbox Series X Console

How to hard reset xbox series x console. If you’re looking up instructions on how to hard reset an Xbox Series X, it’s likely because you’ve run into a problem with your system that has rendered the usual restart procedures useless. Even while these issues are uncommon with the Xbox Series X, they are nevertheless extremely annoying because they prevent your console from working at all unless you fix them. We’ve got you covered on how to hard reset your Xbox Series X so you can get back into the action as soon as possible.

how to hard reset xbox series x console

How to hard reset an Xbox Series X

You can try resolving a crash or unresponsiveness by performing a hard reset on your Xbox One Series X console. Here is the procedure to accomplish this:

  1. If you want to shut off your Xbox completely, you need hold the power button for about 10 seconds.
  2. You’ll need to be patient for thirty seconds
  3. You may restart your Xbox by pressing the Xbox button on the console or the controller.

If you don’t see the green Xbox logo splash screen and instead enter the dashboard, you may not have held the Xbox button down long enough to disable instant-on mode. The Xbox Series X can be hard reset by pressing and holding the power button until the console powers down, then waiting at least 10 more seconds with the power off. After that, you can plug the console back into the wall and power it up as usual.

Please be aware that the solutions outlined in this post are only meant to remedy some issues that cause the Xbox Series X to briefly lock up, and will not delete any games or personal data stored on the device.

How to restart an Xbox Series X

Restarting an Xbox One Series X is as simple as using the controller to access the relevant menu item, assuming, of course, that the device is in working order. There are two ways to accomplish this:

RESTART XBOX SERIES X VIA POWER CENTRE

  1. Activate Power Centre by holding the Xbox button on the controller.
  2. Select Console Restart from the menu.
  3. Simply select the Restart option.

RESTART XBOX SERIES X VIA GUIDE

  1. To access Guide, press the Xbox button on the controller.
  2. To adjust the power settings, go to Profile & system > Settings > General > Power mode & startup.
  3. Click the button labelled “Restart now”

How to Factory Reset an Xbox One or Xbox Series X

Whatever Xbox console you own, whether an Xbox One or Xbox Series X, the process of resetting it to factory settings is identical.

  1. Start the preferences menu.
  2. In order to view your console’s specific information, go to System > Console.
  3. Choose to factory reset the system.

Selecting “Reset console” brings up a menu with three choices.

  • Reset and remove everything: If you select this option, the Xbox will delete all of your information, including game saves, profiles, and any other software you may have installed. True factory reset occurs here. This is the last resort when troubleshooting, and should be selected only if you are ready to get rid of your console.
  • Reset and keep my games & apps: If you’re having issues with your Xbox, this is the best menu option to select. Without erasing any content, the operating system is reset, the cache is cleared, and corrupt data is removed. This is a good solution if you have a lot of strange console problems.
  • Cancel: Choose this if you don’t want to clear the console’s settings. It simply sends you back to the home screen without doing any harm.

Keep in mind that the Xbox doesn’t require a confirmation or password to proceed with the reset. There is no way to undo your decision once you’ve made it because the system will automatically implement it.

how to hard reset xbox series x console

How to Factory Reset an Xbox Through USB

In the event of more severe problems, such as the Xbox failing to launch, a reset can be performed by copying a specified file to a USB drive and inserting it into the console. There are a few prerequisites before you can begin:

  • What is a Windows PC?
  • A minimum 4-GB NTFS-formatted USB flash device.

You should take note that the drive must be completely empty apart from the $SystemUpdate file.

The next step involves your Xbox itself

  1. Pull the Ethernet cable out of the console’s rear if you’re utilising a wired connection.
  2. Turn off the Xbox and unplug it from the wall.
  3. Disconnect the power and reattach it after 30 seconds.
  4. Put the $SystemUpdate file on a USB device and plug it into the Xbox.
  5. Hold down the Pair and Eject buttons at the same time. 

Note: In order to eject a disc from a digital console, you need only hold the Pair button. 

  1. For the next ten to fifteen seconds, hold the Pair and Eject buttons down while pressing the Xbox button on the front of the console.
  2. Pay attention for the two tones that signify a power increase. After the second tone, you can release the Pair and Eject buttons.
  3. After the console restarts, remove the USB drive.

The digital experience guide will load successfully onto the screen. You can follow its prompts to successfully reset your device. Restarting a console can take a while and necessitates an active internet connection. After booting, reconnect the Ethernet cable.

About Startup Tones

Listening for the startup tones isn’t simply a necessary step but an informative one. The How to hard reset xbox series x console Xbox’s boot-up sounds provide important context for what’s happening. After following the steps above, the console should make its first sound around 10 seconds after being turned on for the second time.

A USB update has been detected, as indicated by the initial tone. If you hear a second tone, it means you’ve successfully copied and mounted the file. The Xbox does not routinely check for a USB update unless it is specifically instructed to do so. By simultaneously pressing the Pair and Eject buttons, you can force the device to check for software updates.

If you do not hear these two tones, it signifies that something has gone wrong with the update and you may need to redo the process.

Please note: An Xbox may be reset to factory settings through USB. Your Xbox One or Series X will be completely wiped clean.

The digital experience guide will load successfully onto the screen. You can follow its prompts to successfully reset your device. Restarting a console can take a while and necessitates an active internet connection. After booting, reconnect the Ethernet cable.

Also Read: 

3 Ways for How to connect Xbox one controller to PC

Love and Thunder Sweepstakes Reveals Mjölnir-Themed Xbox Series X

Samsung Gaming Tv Hub Brings Xbox, Twitch and More to Newest Smart Tvs

Xbox Gift Card Generator Points to Be Remember & Taken Care of: 2022 Latest Updated

how to hard reset xbox series x console

FAQs: 

Q1: Is there a reset button on Xbox Series X?

For a complete factory reset of your Xbox One, Series X|S console, follow these steps: You must press and hold the console’s Power button for a few seconds in order to force a complete power cycle. Do not repeatedly press this button; doing so will put the console to sleep.

Q2: How do you fix the black screen of death on Xbox One?

  1. To access the game’s control panel, hit RT + Y.
  2. Disconnect from Xbox Live and switch your console to offline mode.
  3. Unplug any peripherals you may have left in the system.
  4. First, you should try turning the console off and then using the Eject button to get the disc out.

Q3: What is a power cycle reset?

To perform a “power cycle reset,” simply turn off the machine and then back on again using the power button. The system is actually coerced into going through a whole set of transitions, from S0 through S5 and back to S0.

Q4: What does factory reset do?

When you restore your phone to factory settings, all of your personal information is deleted. Although information saved to your Google Account will be retrievable, any installed applications and their associated data will be deleted. You should have your data backed up in your Google Account so that you can access it easily after a data restoration. Master the art of data backups.

Q5: Why is my Xbox just showing a black screen?

A dark screen means your console needs an update. However, if “No Signal” appears, it could be due to a problem with the HDMI cable, the HDMI port on the TV, or the HDMI port on the console. If you want to be sure your console is working properly, try it out on a different TV.

Jennie Marquez

Jennie Marquez

Jennie is a Staff writer, contributor and has been writing about tech for over a decade. Jennie’s work at trendblog is to specialize in phones and tablets, but she also takes on other tech like electric scooters, smartwatches, fitness, mobile gaming and more. She is based in London, UK.
Prev Post

How to Get the Windows 11 restore classic start menu

Next Post

Here is How to put iPhone 13 in Recovery Mode if you Can’t update or Restore it

post-bars

Leave a Comment